Autronica Autroprime Guide de l'utilisateur télécharger pdf (Page 71)

Service Commands

Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,

Autronica Fire and Security AS

Page 69

16.3 Testing Detection Zones

To be able to manually test points (detectors or manual call points)

without automatic actioning of Fire Protection Equipment (FPE), Fire

Alarm Routing Equipment (FARE) or Fire Alarm Devices (FAD),

selected detection zones, can be set in test mode. In this mode, any

point connected to the selected detection zone(s) can be tested

individually (with, for example, test gas) without automatic actioning

(i.e. without audible indication) from sounders, bells, etc.

From the Service Menu, perform the following:

 Use the arrow down button to scroll downwards to

Unit Test, then press Enter.

 Press Enter once more.

 Use the arrow button to select the detection zone that is to be

tested. Use, if necessary, the multiselect feature to select

several detection zones.

 Press the Function button

 To start the test, press Enter.

 Press Enter once more to confirm.

 To stop the test, use the arrow button to select Stop Test, then

press Enter twice.



1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 81 82

Pas de commentaire

Autronica Autroprime Guide de l'utilisateur Page 71