Autronica Autroprime Guide de l'utilisateur télécharger pdf (Page 14)

Operating the Tool

User Guide AutroClient, Autroprime Interactive Fire Detection System, 116-P-APRIME2-AUTCLI/LGB, 2012-06-15,

Autronica Fire and Security AS

Page 14

4.4.1 Configuring unit properties

In the Site view, the panel topology will be listed. When selecting a

loop driver. the connected loop units will be listed in a table as shown

below.

Figure 11. AutroClient Site view.

 To change a unit name, double click the name and type in a new

one, the same will apply for the Detection Zones and the Alarm

Zones.

 For the onboard unit the function can also be changed, double click

the function, and a combo box with optional functions for the

selected unit will be displayed.

Figure 12. AutroClient Site view, changing onboard unit function.

The filter function in the system view can filter the unit tree view by

name, function or hardware. The filter function is useful when

changing a common property like override dependency and delay for

manual call points. To do this operation type in “manual call point” or

“bf” which is the hardware name and use the multiple select in the unit

tree view, then change the override dependency and delay property

for one of the selected manual call points. The property will be

updated for all the selected manual call points.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Autronica Autroprime Guide de l'utilisateur Page 14